SEKURE Paradox Spectra 1641 Uživatelský manuál stáhnout pdf (Strana 8)

6 Installation Guide

Keypad Zone Requires 1kΩ EOL Resistor

Section [2] — Option [2]

Off

= No (default)

On = Yes

When option [2] is off, you do not need to install an EOL

resistor. When option [2] is on, you must install an external

1kΩ EOL resistor as shown in Figure 1 on page 32.

Keypad Zone Set To Keypad Zone 1 or 2

Section [2] — Option [3]

Off = Keypad Zone 1 (default)

On = Keypad Zone 2

The Spectra system supports two keypad zones, and this

option determines whether the on-board keypad zone input is

identified as keypad zone 1 or keypad zone 2.

Keypad Tamper Supervision

Section [2] — Option [4]

Off = Disabled (default)

On = Enabled

The keypad can be ordered with or without an anti-tamper

switch. If you want the system to supervise the status of the

anti-tamper switch, you must turn on option [4]. If the tamper

switch is open, the keypad will send the message “Keypad

zone open”. If you do not have an anti-tamper switch or if you

do not want the system to supervise its status, turn off option

[4].

1641-TI02.fm Page 6 Tuesday, January 23, 2007 9:40 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Žádné komentáře

SEKURE Paradox Spectra 1641 Uživatelský manuál Strana 8