SEKURE SX-3100LCD Návod k obsluze stáhnout pdf (Strana 239)

100

101

BREAK-OUT BOX 227

5.0 USING THE SNAPSHOT MODE

Press 3 to select <SNAPSHOT> mode from the <BREAK-OUT BOX> menu. From the

<SNAPSHOT> menu, press 1 to use the default Data List for the snapshot tests. To

select a <CUSTOM DATA LIST>, press 2 to display the <SIGNAL SELECT> options.

Signal selection is explained in Section 4.0 Custom Data Mode on page 226.

Previously captured data may be reviewed by selecting <3: Snapshot Replay>.

Select <4: Trigger Point> to setup the Tester to capture data that occurs before, after, or

both before and after the trigger occurs.

ACTIVE KEYS

u d Change highlighted menu item.

1 - 4 Select a snapshot option.

e Select highlighted menu item.

GROUND CHECK

During initialization of the BOB functions, the Tester checks to see if the BOB is correctly

connected to the vehicle. If the Tester detects a possible connection problem, this screen is

displayed. Please check the following:

• ECU Connectors are improperly connected or damaged.

• BOB harness connectors are improperly connected.

• The vehicle battery is completely discharged.

The data list display indicates the ground signal which may be open.

HINT

If abnormal signal values are displayed in <DATA LIST> or

<CUSTOM DATA> mode, use the <OSCILLOSCOPE> mode

to confirm the signal values before replacing any parts.

1 2 ... 234 235 236 237 238 239 240 241 242 243 244 ... 377 378

Komentáře k této Příručce

Žádné komentáře

SEKURE SX-3100LCD Návod k obsluze Strana 239

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu SEKURE SX-3100LCD